This post is also available in: Tiếng Việt (Vietnamese)

The PC-3000 SSD Software System operates in tandem with one of the three up-to-date hardware platforms – PC-3000 Portable PRO, PC-3000 Express, or PC-3000 UDMA – and it is intended for SSD repair and diagnosis and for data recovery from SSDs with SATA, PATA, mSATA, M.2, PCIe (NVMe/AHCI), PCIe x16, Apple Macbook, Apple Macbook PRO A1706/1708, Intel Optane, U.2/U.3, CFexpress interfaces and the capacity from 32 GB to 2 TB produced by different manufacturers, such as OCZ, Corsair, Crucial, RunCore, A-DATA, G.Skill, Micron, Plextor, Intel, Samsung, Seagate, SanDisk, Kingston, and others.

The PC-3000 SSD contains a set of specialized utilities for working with solid-state drives. This set includes the Universal Utility for diagnosing any SSD based on the ATA-8 specification (both currently existing models and those that will be manufactured in future) and the Active Utilities (Special Utilities) intended for working with a particular drive model in factory mode. It enables to deeply diagnose SSDs, to perform service operations, to re-write the drive’s microcode, to get direct access to memory chips, to carry out low-level formatting blocking the damaged cells and placing their addresses into the defect table, and to perform many other useful operations.